The use of heat transfer jackets can improve the efficiency of glass-lined reaction tanks

The heat transfer jacket refers to a jacket added outside the container wall (or pipe wall), which is generally produced by ordinary carbon steel. The reason why the glass-lined reaction tank uses a heat transfer jacket is to improve the quality of the equipment. Response efficiency, promote equipment use.

The heat transfer jacket used in the reaction tank itself is generally made of ordinary carbon steel. It is usually placed outside a reaction tank and then installed with some other cooling or heating inlets and outlets. Therefore, its reaction efficiency can be improved when it is used.

When the glass-lined reaction tank is heated with water vapor, the position of the inlet pipe should be as close as possible to the position above the jacket, so that some condensate inside the equipment can be discharged from the bottom position. Come out, if the liquid is used for heat transfer, the inlet pipe should be installed at the bottom, so that the heat transfer medium can enter the jacket of the reaction tank as a whole when it is used. in the space.

Moreover, if you want to have better heat transfer efficiency when you use it again, you need to open the upper end of the jacket to discharge some gas that cannot be condensed, so that the liquid inside the jacket can be reduced. The area that can be reached, so that the equipment can have a higher flow rate when it is used, and it can also avoid the short circuit of the equipment when it is used, so its own structure is often more complicated of.

When we install and select the jacket, we also need to choose the appropriate size according to the model volume of the reaction tank itself, and the jackets of different heights also need to be selected according to the heat transfer area.

The glass-lined reaction tank uses a heat transfer jacket during operation, and can be fed with a heating medium such as steam, hot water or hot oil to heat the material in the container (or in the pipeline), or can be fed with a cooling medium such as cooling water or other The cooling fluid is used to cool the material in the container (or in the pipeline), so as to improve the reaction efficiency of the equipment.

The above is the introduction of how to use the heat transfer jacket to improve the efficiency of the glass-lined reaction tank. In short, the operation according to the above introduction can better ensure the use of equipment and the related efficiency.