Main technical specifications for enamel reactors
2022-07-28
The enamel reactor is an excellent corrosion-resistant equipment. Has been widely used in chemical, petroleum, pharmaceutical, pesticide, food and other industries. This has an inseparable relationship with the technical specifications of the equipment, so the technical specifications of the reactor are introduced below:
1. Use pressure
0.2---0.4Mpa
2. Acid resistance
It has good corrosion resistance to various organic acids, inorganic acids and organic solvents. For example, if the reactor sample is placed in 20% HCI solution and boiled for 48 hours, the corrosion rate is 0.9lg/m2.d (the index of superior product is 1.0g/m2.d).
3. Alkali resistance
The reaction kettle is less resistant to alkaline solutions than acid solutions. However, the glass-lined sample of our factory is corroded in 1N sodium hydroxide solution, and the test temperature is 80°C for 48 hours. The corrosion rate is 6.76g/m2.d (the index of the superior product is 7.0g/m2.d).
4. Operating temperature
When heating and cooling enameled equipment, it should be done slowly. The glass-lined equipment manufactured by our factory has a service temperature of 0-200°C, and the temperature-resistant abrupt change is ≥200°C.
5. Porcelain layer thickness
The thickness of the porcelain layer of enamel equipment is 0.8-2.0mm, and the thickness of the porcelain layer of glass-lined equipment accessories is 0.6-1.8mm.
6. Piezoelectric resistance
The reaction kettle has good insulation. When the glass lining is inspected by 20KV high-frequency electric spark within the specified thickness, the high-frequency electric spark cannot break down the porcelain layer.
7. Impact resistance
The smaller the internal stress of the glass layer, the better the elasticity, the greater the hardness, the higher the bending and compressive strength, and the better the impact resistance. Within the specified thickness, when impacted by a steel ball with a diameter of 30mm and a weight of 112g, the impact energy is 282×10-3J (the index of superior products is 260×10-3J).
The above points introduce the technical specifications of the enamel reactor. Only equipment that meets the technical specifications is a qualified good equipment. This content is also related to your choice. Although the performance of the equipment is excellent, if you choose a piece of Qualified equipment, then it will not bring the desired effect.