How to protect glass-lined reactors from damage

Everyone is familiar with the use of glass-lined reactors, but there will always be more or less damage to the equipment during use, which has a bad impact on normal work. This is something that many users don't want to happen, but is common. In order to help you use it, the following will introduce how to avoid damage to the reactor.

1. For the reactor, there is a large difference in thermal stress between the jacketed part and the non-jacketed part.

2. Because the pressure in the glass-lined layer of the nozzle of the equipment is relatively small, sometimes the glass-lined layer may be damaged even though the sudden change in temperature difference is within the temperature range allowed by the manufacturer.

3. Improper design of the inlet and outlet positions on the jacket of the reactor will also cause excessive thermal stress. The outlet pipe of the jacket should be as close as possible to the upper adapter ring.

4. Introducing the heat exchange medium from the outlet will cause excessive thermal stress and damage the reactor.

The content introduced above is the relevant measures to avoid damage to the glass-lined reactor. Of course, the protection of the equipment is inseparable from the correct use of the user. If you don’t know enough about the equipment, then I would like to advise you that if you want to maintain the equipment better, it must be operated and used by professional operators.